High-quality concrete sealing services in Canmore & Banff
What to Expect When Getting Concrete Sealing
At Pine Peak Paving, we take pride in delivering high-quality concrete sealing services with a smooth, step-by-step process that ensures your satisfaction. Here’s a detailed look at what you can expect from the initial consultation to the final approval.
Get a free quoteInitial Consultation and Assessment
Contact and Booking
The process starts when you request a free estimate. We’ll then schedule an on-site visit at a time that’s convenient for you to assess your concrete surfaces and discuss your specific needs.
Inspection and Evaluation
One of our experienced team members will arrive at your property to evaluate the current condition of your concrete. We’ll check for cracks, wear, stains, and any other issues that may need to be addressed before sealing.
Recommendation
Based on our inspection, we’ll recommend the best sealing products for your surfaces (penetrating, acrylic, epoxy, etc.) depending on your goals—whether you’re looking for moisture protection, slip resistance, or aesthetic improvements.
Estimate and Approval
After evaluating the surface and discussing your needs, we’ll provide a detailed estimate that outlines the cost and timelines. Once you approve, we’ll schedule the work.
Surface Preparation
Cleaning
Proper surface preparation is key to successful concrete sealing. Our team will thoroughly clean the concrete to remove dirt, debris, and stains. This process may involve:
- Pressure washing to remove surface-level dirt and grime.
- Using specialized cleaning agents for oil, grease, or chemical stains.
- Manual scrubbing for stubborn areas.
Crack and Damage Repair
If there are any visible cracks or damage, we’ll repair them using professional-grade patching compounds before applying the sealant. This ensures the concrete surface is smooth and uniform.
Drying Time
The surface must be completely dry before sealing to ensure proper adhesion of the sealant. This drying period may vary depending on weather conditions, but we typically allow 24 to 48 hours after cleaning before moving forward.
Application of the Concrete Sealant
Masking and Protection
We take care to protect the surrounding areas, including walls, landscaping, and adjacent surfaces, by masking them off to prevent any accidental overspray or sealing beyond the intended area.
Sealant Application
Depending on the type of sealant (penetrating, topical, or decorative), our team will use specialized equipment (sprayers, rollers, or brushes) to apply the first coat of sealant evenly across the entire surface.
- Penetrating Sealers: These are absorbed into the concrete and provide protection without changing the appearance.
- Topical Sealers: These sit on the surface and can give a wet or glossy finish.
- Decorative Sealers: These may enhance color or texture, especially for stained or stamped concrete.
Second Coat (if required)
For some sealants, a second coat is necessary to ensure full coverage and protection. We’ll allow sufficient drying time between coats, typically 4 to 6 hours.
Curing and Drying
Curing Time
After the sealant is applied, it needs time to cure properly. Depending on the product used, the concrete should remain undisturbed for 24 to 48 hours to allow the sealant to fully bond and harden.
Traffic Restrictions
During the curing period, we recommend keeping foot traffic off the surface for at least 24 hours, and vehicle traffic off for 48 to 72 hours to prevent damage.
Final Inspection and Approval
Customer Walkthrough
Once the sealing is complete and the surface has cured, we will schedule a final walkthrough with you to inspect the work. During this walkthrough, we’ll show you the results and address any questions or concerns you may have.
Touch-Ups (if necessary)
If there are any areas that need attention, we’ll address them immediately, ensuring that the surface is flawless before you begin using it again.
Final Approval
Once you’re satisfied with the finished product, we’ll ask for your final approval and provide care instructions for maintaining your newly sealed concrete surface.
Ongoing Care and Maintenance Tips
Regular Cleaning
To keep your concrete looking its best, we recommend regular cleaning with a mild detergent and water. Avoid using harsh chemicals or power washing at high pressure, as these can degrade the sealant over time.
Resealing
Depending on traffic and exposure to elements, we suggest resealing your concrete every 2 to 3 years to maintain maximum protection and appearance.
Seasonal Maintenance
In colder climates, avoid using de-icing salts, as these can damage the sealant and the concrete beneath it.
Why Choose Pine Peak Paving for Concrete Sealing?
Expertise and Experience
Our team has years of experience working with all types of concrete surfaces and sealants, ensuring long-lasting results.
Customer Satisfaction
We are committed to making sure you are completely satisfied with our work from start to finish.
High-Quality Materials:
We use only the best sealing products that are designed to withstand the elements and protect your concrete for years to come.
If you have any further questions about the concrete sealing process or would like to schedule a consultation, feel free to contact us. We’re here to help you protect and enhance your concrete surfaces with the highest quality service and attention to detail.
Get a free quote