High-quality anti-slip application services in Canmore & Banff
What to Expect When Getting Anti-Slip Application
At Pine Peak Paving, safety and durability are our top priorities, and our anti-slip application process ensures that your concrete surfaces remain safe and secure without compromising their appearance. Ideal for high-traffic areas or surfaces exposed to moisture, our anti-slip coating adds a protective layer to prevent accidents and enhance longevity. Here’s what you can expect from the initial consultation to the final approval.
Get a free quoteFilling and Sealing the Cracks
Contact and Scheduling
The process begins when you request a free estimate. We’ll arrange an on-site visit to assess the areas where you’d like anti-slip protection applied.
On-Site Inspection
During the inspection, we’ll evaluate the condition of your concrete surfaces, identifying high-risk areas where moisture or heavy foot traffic might make the surface slippery (e.g., patios, driveways, walkways, pool decks, and stairs). We’ll also check for any existing damage that needs to be repaired prior to applying the anti-slip coating.
Recommendations and Estimate
Based on our evaluation, we’ll recommend the best anti-slip solution for your specific needs. We offer different textures and levels of slip resistance depending on the area’s use. You’ll receive a detailed estimate outlining the project’s cost and timeline. After your approval, we’ll schedule the work.
Surface Preparation
Cleaning the Surface
As with any coating application, proper surface preparation is crucial for the anti-slip treatment to adhere correctly. Our team will thoroughly clean the surface to remove dirt, debris, oil, and other contaminants:
- Pressure Washing: We use high-powered pressure washing to clean the concrete surface, ensuring it is free from dirt and grime that could interfere with adhesion.
- Chemical Cleaning: If necessary, we apply a safe cleaning solution to remove oil stains, grease, or algae from the surface to ensure a clean base for the coating.
Surface Repair (if needed)
If any cracks or damage are found during the inspection, we’ll repair these before applying the anti-slip coating. This ensures a smooth, even surface for the application.
Masking and Protection
We take care to mask off any areas that don’t require anti-slip treatment, such as landscaping, adjacent surfaces, or decorative elements. This ensures that only the designated areas receive the coating.
Anti-Slip Coating Application
Choosing the Right Coating
Based on your specific requirements, we’ll choose the most appropriate anti-slip coating for your project. Options include:
- Acrylic-Based Anti-Slip Coatings: These provide durable protection and are ideal for residential areas like patios and walkways.
- Epoxy or Polyurethane Coatings: These are more durable and suitable for high-traffic or commercial spaces.
- Additives: For some applications, we add slip-resistant aggregates like silica, glass beads, or aluminum oxide to the coating to enhance traction.
Application Process:
- First Coat: We apply the first coat of the anti-slip solution evenly across the prepared surface using specialized rollers or sprayers.
- Texturing (if required): If your project requires a specific texture or level of grip, we’ll apply aggregates or textured coatings to ensure the correct slip resistance. This is particularly important for areas like pool decks or stairs.
- Second Coat: After allowing the first coat to dry, we apply a second coat to provide additional protection and durability, ensuring the surface is completely covered and resistant to wear.
Curing and Drying
Curing Time
Once the anti-slip coating is applied, it needs time to cure and bond with the concrete surface. Depending on the type of coating used and the weather conditions, this can take between 24 to 48 hours. During this time, we advise keeping foot traffic off the surface to allow the coating to fully harden.
Drying Before Use
For areas that experience regular vehicle traffic, such as driveways, we recommend waiting an additional 48 to 72 hours before allowing cars or heavy equipment on the surface to ensure the coating is fully cured.
Final Inspection and Approval
Customer Walkthrough
After the coating has fully cured, we’ll schedule a final walkthrough with you to inspect the work. We’ll ensure that the anti-slip coating is applied evenly, that the surface has the desired level of traction, and that there are no issues with the finish.
Touch-Ups (if necessary)
If any areas require additional attention, we’ll make sure to address them during the walkthrough to ensure that the coating is flawless.
Final Approval
Once you’re completely satisfied with the results, we’ll ask for your final approval and provide you with tips on how to maintain the anti-slip surface to ensure its longevity.
Ongoing Care and Maintenance Tips
Regular Cleaning
To maintain the anti-slip properties of your coated surface, we recommend regular cleaning with a mild detergent and water. Avoid using harsh chemicals that may degrade the coating over time.
Reapplication
Depending on the level of use and exposure to elements, we suggest reapplying the anti-slip coating every 3 to 5 years to ensure continued protection and safety.
Inspection After Harsh Weather
For outdoor surfaces, inspect the coating after heavy rain, snow, or freezing conditions to ensure there’s no damage or wear. Early detection can prevent issues from worsening.
Why Choose Pine Peak Paving for Anti-Slip Application?
Safety First
We use only the best anti-slip materials, ensuring that your concrete surfaces are safe for all levels of foot traffic, even in wet conditions.
Custom Solutions
Whether you need anti-slip protection for residential or commercial spaces, we offer customized solutions tailored to your specific needs.
Professional Application
Our skilled team ensures that every anti-slip coating is applied with precision, providing long-lasting protection and peace of mind.
If you have any questions about our anti-slip application process or would like to schedule a consultation, contact us today. We’re here to help you keep your concrete surfaces safe and secure with professional, durable anti-slip solutions.
Get a free quote